The various forming methods of ceramic lovers cup are: grouting method (platform grouting, high pressure grouting, lathe forming), stamping forming and dry pressing method.
1. Stamping forming: also known as plastic forming, used to make ceramic couple cups; plastic forming can be divided into sculpture, printing blank, drawing blank, spinning and rolling and other types.
2. Slotting molding: the mold with lines is 25-50 times on average; the mold without lines is 50-70 times on average.
3. Car table forming: Car table forming is mainly used for ceramic couple cups. It is characterized by fast speed, 24 hours of operation, and 1 product in 10 seconds. Strips with diameters that meet the requirements → cutting by a soil cutter (cut the length of the soil strips according to the amount of products) → forming on a mechanical lathe with drying equipment.
4. Platform grouting: After the plaster mold is tied with rubber bands, it is filled with mud. The first time is about 15 minutes, and the time is extended in turn. One mold can be filled 8 times a day in 12 hours. Workers should dry the mold after get off work. , to maintain the water absorption of the mold.
5. High pressure grouting: It is mostly used for large and flat ceramic couple cups, etc., and easy-to-deform products are produced according to the platform grouting method.
6. Dry pressing molding: a molding method that uses pressure to press dry powder blanks into dense blanks in a mold.
